Description
Machine Functions
HotStart – To make the electrode easier to ignite, the current at the power source is increased for a fraction of a second during ignition. The HotStart function was specially developed for welding with rutile and Cel electrodes.
SoftStart – The SoftStart function ensures a stable arc at the start of welding and was specially developed for electrodes that are welded with a low welding current (basic electrodes).
TAC – With TAC, one spot is all it takes for tacking, because the pulsed arc sets the two weld pools in motion, making them jump together in next to no time, to make one single weld-pool. The TAC function is also very useful when welding light-gauge sheets without filler metal.
TIG Comfort Stop – At the end of the welding operation, the welding current is switched off automatically if a specific change is made to the arc length. This prevents the arc from being unnecessarily elongated when the TIG welding torch is lifted off the workpiece to end the welding process. This results in a better weld result in the area of the end-crater, as the gas shield is maintained.
PFC (Power Factor Correction) – Enables the use of extremely long power leads with lower losses and improved generator compatibility. This massively expands the action radius of this welder.
SPECIFICATIONS
